Details:Industry Leading Deep Penetrating Concrete Sealer + Densifier
Recommended for Sealing: Concrete driveways, basements, weak concrete, concrete that will be polished.
Coverage per Gallon: Average 750 square feet after dilution
Packaging: 1 gallon
Finish Characteristics: Does not change overall appearance of the substrate
Application Temperature: 45 degrees F â€“ 95 degrees F
Cure Schedule: Allow material to dry for 6-24 hours to achieve maximum benefits
Primer: None required
Topcoat: None required. Can paint, seal or stain after using Lithi-Tek 4500
Prevents the growth of mold and mildew and the spread of radon.
Completely effective against high hydrostatic pressure.
Completely effective against the spread of vapor transmission.
Increases concreteâ€™s compressive strength
Increases concreteâ€™s adhesion of paints, epoxies and surface sealers
Efflorescence attacks are stopped.
4-6â€ of penetration is achieved.
1 gallons cover 600-800 square feet after dilution.
Seals hairline and shrinkage cracks
Resists chemical attack
Provides a range of protection from freeze/thaw cycles.
Easy to apply, labor-cost effective.
Nontoxic, no VOCâ€™s and no harmful fumes.
Will never need to seal again.
Do not use on extremely porous concrete such a hollow concrete block.
Do not over apply! Excess material may result in a white residue or discoloration.
Do not apply to a surface that has been previously treated or sealed.
Do not use in areas where strong acid or alkali attack can be expected.
Do not apply to frozen of freezing surfaces.
Prevent from getting on glazed and finished surfaces such as glass, aluminum etc.
Protect surfaces from equipment leaks or other leaks such as oil, hydraulic fluid etc.